lock order reversal: 1st 0xffffff800030b018 iwn0_com_lock (iwn0_com_lock) @ /usr/src/sys/net80211/ieee80211_proto.c:1082 2nd 0xffffff80002f1080 iwn0 (network driver) @ /usr/src/sys/modules/iwn/../../dev/iwn/if_iwn.c:2845 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _mtx_lock_flags() at _mtx_lock_flags+0x78 iwn_wme_update() at iwn_wme_update+0xa3 ieee80211_wme_updateparams_locked() at ieee80211_wme_updateparams_locked+0xef ieee80211_wme_updateparams() at ieee80211_wme_updateparams+0x52 ieee80211_wme_initparams() at ieee80211_wme_initparams+0x1d9 ieee80211_sta_join1() at ieee80211_sta_join1+0xb0 setmlme_assoc() at setmlme_assoc+0x70 ieee80211_ioctl_setmlme() at ieee80211_ioctl_setmlme+0x91 ieee80211_ioctl_set80211() at ieee80211_ioctl_set80211+0xaaa in_control() at in_control+0x1ff ifioctl() at ifioctl+0xfc1 kern_ioctl() at kern_ioctl+0xc5 ioctl() at ioctl+0xfd syscall() at syscall+0x1af Xfast_syscall() at Xfast_syscall+0xe1 --- syscall (54, FreeBSD ELF64, ioctl), rip = 0x800c95f7c, rsp = 0x7fffffffde18, rbp = 0x2a --- wlan0: link state changed to UP lagg0: link state changed to UP iwn0: need multicast update callback iwn0: need multicast update callback iwn0: need multicast update callback drm0: on vgapci0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 259 to local APIC 0 vector 48 vgapci0: using IRQ 259 for MSI info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 drm0: [MPSAFE] drm0: [ITHREAD] lock order reversal: 1st 0xffffff80293247d0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559 2nd 0xffffff0008df0c00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _sx_xlock() at _sx_xlock+0x55 ufsdirhash_acquire() at ufsdirhash_acquire+0x33 ufsdirhash_add() at ufsdirhash_add+0x19 ufs_direnter() at ufs_direnter+0x88b ufs_makeinode() at ufs_makeinode+0x2a7 VOP_CREATE_APV() at VOP_CREATE_APV+0x8d vn_open_cred() at vn_open_cred+0x468 kern_openat() at kern_openat+0x179 syscall() at syscall+0x1af Xfast_syscall() at Xfast_syscall+0xe1 --- syscall (5, FreeBSD ELF64, open), rip = 0x804a1edfc, rsp = 0x7fffffff69d8, rbp = 0x8 --- wlan0: link state changed to DOWN lagg0: link state changed to DOWN wlan0: link state changed to UP lagg0: link state changed to UP wlan0: link state changed to DOWN lagg0: link state changed to DOWN wlan0: link state changed to UP lagg0: link state changed to UP acpi_lid0: Lid closed lagg0: link state changed to DOWN wlan0: link state changed to DOWN lock order reversal: 1st 0xffffffff80c1cb60 kernel linker (kernel linker) @ /usr/src/sys/kern/kern_linker.c:1068 2nd 0xffffffff80c1f160 sysctl lock (sysctl lock) @ /usr/src/sys/kern/kern_sysctl.c:256 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _sx_xlock() at _sx_xlock+0x55 sysctl_ctx_free() at sysctl_ctx_free+0x2a ieee80211_sysctl_vdetach() at ieee80211_sysctl_vdetach+0x1a ieee80211_vap_detach() at ieee80211_vap_detach+0x1a6 iwn_vap_delete() at iwn_vap_delete+0x20 ifc_simple_destroy() at ifc_simple_destroy+0x2a if_clone_destroyif() at if_clone_destroyif+0xc0 ieee80211_ifdetach() at ieee80211_ifdetach+0x25 iwn_cleanup() at iwn_cleanup+0x7c iwn_detach() at iwn_detach+0x9 device_detach() at device_detach+0xa4 driver_module_handler() at driver_module_handler+0x338 module_unload() at module_unload+0x35 linker_file_unload() at linker_file_unload+0x16b kern_kldunload() at kern_kldunload+0xf3 syscall() at syscall+0x1af Xfast_syscall() at Xfast_syscall+0xe1 --- syscall (444, FreeBSD ELF64, kldunloadf), rip = 0x80069cedc, rsp = 0x7fffffffe4d8, rbp = 0x4 --- iwn0: detached acpi_lid0: wake_prep enabled for \\_SB_.LID0 (S3) acpi_button0: wake_prep enabled for \\_SB_.SLPB (S3) bge0: Disabling fastboot pci0:2:0:0: Transition from D0 to D3 fwohci0: fwohci_pci_suspend pci0:15:6:1: Transition from D0 to D3 vga0: saving 68 bytes of video state pci0:0:2:0: Transition from D0 to D3 pci0:0:2:1: Transition from D0 to D3 pci0:0:27:0: Transition from D0 to D3 pci0:0:31:2: Transition from D0 to D3 ct_to_ts([2009-09-12 22:27:55]) = 1252794475.000000000 stray irq259 acpi_lid0: run_prep cleaned up for \\_SB_.LID0 acpi_button0: run_prep cleaned up for \\_SB_.SLPB ugen0.2: at usbus0 (disconnected) hdac0: GPIO init: data=0x00000000 mask=0x00000000 dir=0x00000000 hdac0: GPIO commit: data=0x00000001 mask=0x00000001 dir=0x00000001 hdac0: Enabling headphone/speaker audio routing switching: hdac0: as=0 sense nid=20 [UNSOL] hdac0: Pin sense: nid=20 res=0x00000000 bge0: Disabling fastboot bge0: Disabling fastboot fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS resetata0: fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 fwohci0: unrecoverable error fwohci0: unrecoverable error reiniting channel .. ata0: reset tp1 mask=03 ostat0=00 ostat1=01 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=01 devices=0x10000 acd0: setting PIO4 on ICH8M chip acd0: setting UDMA33 on ICH8M chip ata0: reinit done .. ata2: reiniting channel .. ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=10ms status=00000113 ata2: ready wait time=565ms ata2: software reset port 0... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: reinit done .. ata3: reiniting channel .. ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect timeout status=00000004 ata3: AHCI reset done: phy reset found no device ata3: reinit done .. ata4: reiniting channel .. ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000004 ata4: AHCI reset done: phy reset found no device ata4: reinit done .. atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 battery0: battery initialization start ugen0.2: at usbus0 pci0: driver added found-> vendor=0x8086, dev=0x283e, revid=0x04 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=19 pci0:0:31:3: reprobing on driver added pci2: driver added pci4: driver added found-> vendor=0x8086, dev=0x4229, revid=0x61 domain=0, bus=4, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0506, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:4:0:0: reprobing on driver added iwn0: mem 0xf8000000-0xf8001fff irq 17 at device 0.0 on pci4 pcib2: iwn0 requested memory range 0xf8000000-0xf8001fff: good iwn0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 258 to local APIC 1 vector 54 iwn0: using IRQ 258 for MSI iwn0: iwn_mem_lock: could not lock memory iwn0: Reg Domain: \M^?\M^?\M^?\M^?iwn0: iwn_mem_lock: could not lock memory , address ff:ff:ff:ff:ff:ff iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: [MPSAFE] iwn0: [ITHREAD] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps pci6: driver added pci15: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 domain=0, bus=15, slot=6, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:15:6:2: reprobing on driver added found-> vendor=0x104c, dev=0x803c, revid=0x00 domain=0, bus=15, slot=6, func=3 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:15:6:3: reprobing on driver added battery0: battery initialization done, tried 1 times firmware: 'iwnfw' version 44417: 191332 bytes loaded at 0xffffffff8126b0a0 iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_transfer_microcode: could not load boot firmware iwn0: iwn_transfer_firmware: could not load boot firmware, error 60 iwn0: iwn_init_locked: could not load firmware, error 60 wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:1d:72:3e:3e:18 iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_transfer_microcode: could not load boot firmware iwn0: iwn_transfer_firmware: could not load boot firmware, error 60 iwn0: iwn_init_locked: could not load firmware, error 60 iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_mem_lock: could not lock memory iwn0: iwn_transfer_microcode: could not load boot firmware iwn0: iwn_transfer_firmware: could not load boot firmware, error 60 iwn0: iwn_init_locked: could not load firmware, error 60 drm0: [MPSAFE] drm0: [ITHREAD]